Remote Hotstart for the 426?


1 reply to this topic
  • Hamish

Posted June 12, 2005 - 02:12 PM

#1

Has anyone made their own? I was installing a set of push button air bleeders into my forks today and starting thinking I thought one of the bleeders mounted on a block bolted to the clutch perch piped to the inlet manifold should work ok.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 12, 2005 - 03:32 PM

#2

I thought one of the bleeders mounted on a block bolted to the clutch perch piped to the inlet manifold should work ok.

You were wrong.

The hot start you already have gets its air from the mouth of the carb, a filtered source. Why reinvent the wheel by putting corners on it?





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.