removing the impeller?


2 replies to this topic
  • INJURY_69

Posted June 10, 2005 - 10:16 AM

#1

Was wondering what tool was needed to get this off, does one need a impact wrench? :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ncmountainman

Posted June 10, 2005 - 01:09 PM

#2

if your talkin'bout the water pump, i held the impeller with channel locks. theres not alot of torque on it. just be careful not to ding it up :)

  • grayracer513

Posted June 10, 2005 - 01:25 PM

#3

does one need a impact wrench? :)


:) Yikes! Don't do anything heavy handed to the impeller shaft. You'll snap the drive tab off the inboard end!

You are supposed to remove the case and hold the inside end with a wrench on a pair of flats provided for the purpose. Then, you can inspect the shaft for a wear groove under the seal. You'll want to do this if you're removing it to replace a seal. If you're just upgrading the impeller, you could do it by holding the impeller as suggested, but you'll want to be very careful about installing your new one.





Related Content

Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.