426 cam conversion

7 replies to this topic
  • szabo

Posted June 09, 2005 - 11:01 AM


need cam conversion kit to nuetralize manual decompression

  • Daz_426_02

Posted June 09, 2005 - 12:21 PM



  • 02YZ426

Posted June 09, 2005 - 01:42 PM


What he said ^^^^

  • grayracer513

Posted June 09, 2005 - 02:26 PM


There is no kit. You simply install the stock YZ450 cam in place of your existing exhaust cam, check the valve clearance, and you're done. You'll like what it does to the power, too.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yz_for_me

Posted June 09, 2005 - 06:22 PM


You can go with a Hot Cams aftermarket cam or an '03 or later YZ450 cam. The YZ450 cam will be a lot cheaper than the Hot Cams setup.

Do a search on "450 Cam". You will find volumes of info on this topic.

  • Satch0922

Posted June 09, 2005 - 06:43 PM


look at the thread stickied at the top of this forum "450 Cam Mod"

  • yz_for_me

Posted June 09, 2005 - 06:45 PM


look at the thread stickied at the top of this forum "450 Cam Mod"

Oh yea, that too.

  • jonova

Posted June 10, 2005 - 06:58 AM


I got both hotcams from ebay for $250. Well worth it. :)

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.