Can I use the DTM for a while?



2 replies to this topic
  • ButtonFly

Posted February 24, 2001 - 10:34 PM

#1

I am changing to YZ timing right now... as we speak. Getting the Keyboard all greasy :) I have a DVP ordered, but can I use my stock DTM for to take it for a spin? Any word on where to put it? I was thinking about leaning out the DTM 2 clips, but will I hurt anything? I just want to fart around our parking lot, and see how she feels, no major riding... Thanks.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • James_Dean

Posted February 24, 2001 - 10:46 PM

#2

Most people use stock jetting YZ timed without a problem as-is. Clip #3 is common on the DTM. Adjust the pilot screw only if you need to and go roost. :)

[This message has been edited by James Dean (edited 02-25-2001).]

  • robin_des_bois

Posted February 26, 2001 - 05:23 AM

#3

I switched to yz timing last year on my plated wr400 99. From what I've read on this forum, the dvp was better than the stock canadian dxm (which is the same as the dtm but clip posiion changed). I'm using a megamax with the quiet core and just 6 plate to keep sound low which is unusual here on the forum. After lots of trial on many jets, it seems for me that the dxm work better than the dvp. The dvp leave a hole in the 1/8 to 1/4 throttle that's less present with the dxm.

Robin




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.