Rev limiter help


10 replies to this topic
  • Adamc426

Posted June 06, 2005 - 06:54 AM

#1

Does anyone know a way to bypass the rev limiter on a 01 yz 426 or of an ideal dynomax chip kit?

  • grayracer513

Posted June 06, 2005 - 07:32 AM

#2

Your power peak is well below the rev limit, and the torque peak is below that. What's the point in bypassing the rev limit?

  • xXHondaOwnsXx

Posted June 06, 2005 - 07:51 AM

#3

No point at all, plus you risk a higher change of blowing your motor.

  • Adamc426

Posted June 06, 2005 - 12:36 PM

#4

because for some reason my cdi lowerd the limiter down to like 2000 rpms so as soon as i have my bike in 5th grear i hit the limiter, just to say i'm touching the trottle. It dosent affect any other gears just 5th.

  • jespertheil

Posted June 06, 2005 - 01:57 PM

#5

Try disconnecting the gear pos sensor then..

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 02YZ426

Posted June 06, 2005 - 02:14 PM

#6

Are you sure its not jumpin in and out of gear?? Probably not, but it happened to mine. My 5th gear shift fork was bent and when I shifted into fifth with any amount of throttle it would jump in and out so fast it sounded like the rev limiter. Just a thought.

  • grayracer513

Posted June 06, 2005 - 04:45 PM

#7

Check your neutral switch. Put the bike in fifth on the stand and check to see if the lead on the switch open or grounded. It should be open. If it's grounded, it will lower the rev limit to 7000. Replace it. You can also simply disconnect it, but the neutral switch also changes the timing at idle, and my bike starts better in neutral.

  • Adamc426

Posted June 07, 2005 - 09:53 AM

#8

Ok how the hell do i disconnect the gear position sensor?
Sounds like its jumping in and out of grear that could be it the problem started at half thorttle and now its right at a touch, but the bike runs almost perfect on the stand just when there is a weith load on it like when i'm riding.
I already did the neutral mod with the blue wire thanks

  • 02YZ426

Posted June 07, 2005 - 02:05 PM

#9

Where abouts do you live in Ontario??

  • Adamc426

Posted June 08, 2005 - 09:12 AM

#10

North Bay area

  • Slowmotion426

Posted June 08, 2005 - 09:56 AM

#11

Well I just learned something new here. Didn't know all the goods on the TP sensor or rev limiter. Thanks for the info guys.





Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.