03 cam in 02 426?


4 replies to this topic
  • 800screws

Posted May 28, 2005 - 04:34 PM

#1

what parts do u need to make a 426 have auto decompression? is there a kit that u can buy?

  • 02YZ426

Posted May 28, 2005 - 04:36 PM

#2

I bought mine from Hot Cams. All you should need is the cam, shims, and get yourself a TT plug.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted May 28, 2005 - 06:36 PM

#3

All you need is the '03/'04 cam, plus any shims required. A lot of people just use the Yamaha OEM cam instead of the Hot Cams part and have excellent results with it.

Timing is different, though. In brief, you time the intake correctly, and then set the exhaust so that there are 14 chain pins between the two 12:00 marks on the two cams. The mark on the exhaust cam doesn't line up with the head casting properly because it was made to be used in a different head.

  • Satch0922

Posted May 28, 2005 - 06:36 PM

#4

what parts do u need to make a 426 have auto decompression? is there a kit that u can buy?



Read the thread stickied at the top of this forum "450 cam mod"

  • 800screws

Posted May 29, 2005 - 11:16 AM

#5

thanks





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.