'99 WR 400 jetting problems



2 replies to this topic
  • Ynahg

Posted February 21, 2001 - 05:01 AM

#1

When accelerating with WOT in 3th, 4th en 5th the engine has a slight difficulty (hesitation) to rev up from med. revs to high revs. To rich , to lean ?
Temp. : 20°C, hight : 0 ft

!!! Checked my settings : MJ 168 PJ 45 Clip :#3 DTM needle

Throttle stop removed, Air Filter Cap Removed, YZ exhaust

To lean ???????

[This message has been edited by Ynahg (edited 02-27-2001).]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Taffy

Posted February 21, 2001 - 05:27 AM

#2

too rich if it spits every 1-2 seconds.

if it vibrates it's too lean.

Taffy

  • James_Dean

Posted February 21, 2001 - 06:56 AM

#3

Probably lean with stock jetting, try a bigger main jet.

You shouldn't get an answer when you don't post your jetting :)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.