home made fork seal driver......


4 replies to this topic
  • my98mugen

Posted May 20, 2005 - 10:35 AM

#1

anybody made there own fork seal driver? maybe pvc or something. i was thinking, big socket maybe?

im just to cheap to pay 68 bucks for that fork seal driver.

  • bluestragler

Posted May 20, 2005 - 12:16 PM

#2

I used a section of PVC pipe that was longer than the fork tubes so I could use a hammer to tap the seal into place. I used the old seal between the PVC pipe and new seal so I wouldn't bugger up the new one. It worked perfect.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • miguelitro

Posted May 20, 2005 - 12:30 PM

#3

yup what he said!!!

hey blue so ya like xrs ehhh?

  • my98mugen

Posted May 20, 2005 - 01:55 PM

#4

that sounds like a good idea.........

but i just barrowed one......... so maybe next time

  • Nayther

Posted May 20, 2005 - 03:08 PM

#5

piece of copper pipe will work also just be careful and use the old seal as a buffer.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.