Blinkers


7 replies to this topic
  • JUSTNEIL

Posted May 16, 2005 - 06:41 PM

#1

I would like to add front and rear blinkers to my 2004 wr 450. Do I have to get the entire trick or baja kit, or can I just add blinkers.

  • 1rkcooper

Posted May 16, 2005 - 09:28 PM

#2

Get the lights and a flasher and wire them up. You will also need the switch to turn them on and off.

  • Strattos

Posted May 20, 2005 - 11:57 AM

#3

They didn't come with your bike when you bought it?

  • jim-in-so-ore

Posted May 20, 2005 - 01:44 PM

#4

USA bikes are not street legal like our Australian cousins. No hi/low beam, no horn, no stop light and no blinkers. Headlight & Tail lights only. If we want the street legal we must buy a kit to do it. That runs about $450.00 American dollars. :)
Jim

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Chris_from_Oz

Posted May 20, 2005 - 05:32 PM

#5

Jim, just curious. Does the US spec' WR come with the connectors already in the wiring loom for the turn sig's, horn etc? Is it simply a matter of bolting them up, and plugging a few connectors in?

  • Bamster

Posted May 21, 2005 - 06:25 AM

#6

Jim, just curious. Does the US spec' WR come with the connectors already in the wiring loom for the turn sig's, horn etc? Is it simply a matter of bolting them up, and plugging a few connectors in?


Not here in Canada but they do come with a dual element socket in the tail light.
I don't know why we don't get the Aussie version here. You buy a new WR here and all you have to do is bring your bill down to the DMV and street register it,
no safety .

  • RichBaker

Posted May 21, 2005 - 10:17 AM

#7

USA bikes are not street legal like our Australian cousins. No hi/low beam, no horn, no stop light and no blinkers. Headlight & Tail lights only. If we want the street legal we must buy a kit to do it. That runs about $450.00 American dollars. :)
Jim


Or, you buy the K&S switch, some cheap low profile t/sigs and flasher and do it yourself for less then $100......

  • jim-in-so-ore

Posted May 22, 2005 - 03:13 PM

#8

Chris from Oz,
No, the are no plugs for blinkers in the harness. Just the 3 wire plug for the tail light/stop light but no stop light switch or wiring. We have to buy or build kits to make them street legal. (www.trickdualsport.com) :)
Jim




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.