Need Help with hot cam


2 replies to this topic
  • Parx_400

Posted May 08, 2005 - 06:21 PM

#1

I Installed the cam and started the bke but it sounds like the piston is hitting the valves. the Clearnes are good. here is a pic at TDC. i think the intake is out one tooth but if i turn it 1 tooth the pison will really hit the valves. please look at the bolts on the cam and tell me if they look to be in the right place. i am soo lost on this project right now.


http://i6.photobucke...0/IMG_09141.jpg

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • FFRacing79

Posted May 08, 2005 - 07:24 PM

#2

With an adjustable sprocket, the only positive way to tell is with a degree wheel and indicator...otherwise you are just guessing. Tdub
By the way, did you ever call HotCams??

  • Parx_400

Posted May 08, 2005 - 08:58 PM

#3

i will tomarrow when they are open.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.