hrc cam


3 replies to this topic
  • mattydog

Posted May 07, 2005 - 09:45 PM

#1

its time to put my old xr 600 back in service . it has a new je piston [10.5] i think big fin ported head and a stock cam with the auto decomp removed[thanks alot xrs only] .i have what i was told is hrc cam w/decomp i am thinking that it will help to slightly lower my compression and make it start better and may help the power to . so the question is is this a tru drop in cam with this piston or will my valves hit or will i have to shorten the guides i do not want to pull the head if i do not have to any coments ?? this cam says nh4 on it is this an hrc cam?? thanks :)

  • XRMANU

Posted May 08, 2005 - 05:11 AM

#2

NH4 is the HRC code,yes :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mattydog

Posted May 08, 2005 - 09:52 AM

#3

thanks xrmanu do you know if it just drops in ?

  • frankstr

Posted May 08, 2005 - 11:21 AM

#4

Always, When installing a bigger cam piston to valve clearance and valve retainer to valve guide clearance should always be checked.... :)
Unless you know of someone with the same set up and it all worked....
But it should always be checked due to manufacture errors....IMO.... :D
And make sure the springs will work , No coil bind, proper spring pressures..





Related Content

Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.