Question on valve adjustments on 92 XR600R


4 replies to this topic
  • michaelschorpp

Posted May 06, 2005 - 07:51 PM

#1

I'm getting conflicting information on valve clearances. My Clymers manual says 0.002 intake and 0.004 exhaust. An online Honda manual says 0.004 intake and 0.005 exhaust. Which one is right? I'm just finishing off my first top-end job and I want to do it right!

In regards to the special procedure for the right hand exhaust valve, the crank has to be rotated counterclockwise to the T mark, but not past. If it goes past, then you have to rotate 2 full turns and align the T mark again. Is that the gist of it?

Mike.

  • dabeyta3

Posted May 06, 2005 - 11:48 PM

#2

Just a wild guess but- my 93 XR650L is 0.004 and 0.005

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • goblin127

Posted May 07, 2005 - 05:25 AM

#3

.004 and.005 are the right ones. honda manual.

  • dabeyta3

Posted May 07, 2005 - 05:44 AM

#4

I looked it up in my Clymer Manual and it says 0.004 and 0.005 are the clearences.

  • AzMtnThumper

Posted May 07, 2005 - 05:57 AM

#5

In regards to the special procedure for the right hand exhaust valve, the crank has to be rotated counterclockwise to the T mark, but not past. If it goes past, then you have to rotate 2 full turns and align the T mark again. Is that the gist of it?

Mike.


Yes, that is correct. :)





Related Content

Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.