Jump to content

Best pipe for YZ thumpers


Recommended Posts

I have a Jardine pipe. It is supposed to increase the HP on my bike to 50hp. :D Somewhere on the internet I found a write up/table where all of the aftermarket pipes were put on the YZ and how each affects horsepower. WOW!!! What a difference. My bike is a rocket. ?

Link to comment
Share on other sites

I've got an FMF Powercore IV (older style) and a hi-flo header(starting to rust ? ). It is the loudest thing i've ever heard on a yzf. Not saying that's a good thing, I need a repack cartridge. but, the throttle response was improved and so was the mid to top. I like it, needs to be quieted down a bit. It sounds good under a helmet, but I feel sorry for the rest of the pack behind me :D .

Link to comment
Share on other sites

I just orderd the White brothers e series PRO MEG..its just like the original e-series, except a little bit more h/p increase... where the mid pipe hit the silencer is a little bit wider, i think thats where the power increase is.

p.s. what did u guys with the e-series change your jets too ?

Link to comment
Share on other sites

I have the white bro's pro searies. ran about 600 for the full systems. the only thing is spark arrestor problems. as for sound i like it alot because to me it has a deeper sound than most pipes so you can hear your engine rpms easier when trail riding with a bunch of folks.

Link to comment
Share on other sites

i got the yoshi pro series on my 250f and it made the bike come alive real good. i got a hole lot more mid and top. i can pull a gear higher everywhere and just scream it... i also got a little bottom.. i give the pipe 2 thumbs up.

but would i pay 800 bucks for it no way.. i would get the compseries.. puts out the same power as the proseries but is like 1 pound heavier.. BUT i got my pro series for 380 off my dads friend at work.. so i lucked out.

Link to comment
Share on other sites

"Very Loud" that's a good thing?

My TA with the sparky isn't much louder, if any, than the stocker. I don't know why that guy thought they were so loud...

Before I had the TA, I had an FMF PowerCore IV SA, the old round core design. That pipe was LOUD, probably 101 dB. The TA is a better pipe and sounds better to boot, IMO you just can't go wrong with the TA unless you are in a hurry to get one, because sometimes it takes Bob a while to build one.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...