grinding grunt when letting the clutch out....

21 replies to this topic
  • grayracer513

Posted May 12, 2005 - 08:09 PM


I drained both, I also pulled the filter. The filter looks like the K & N type filter (maroon color) and it wasnt paper so i cleaned it and put it back. On the oil filter cover, what type of gasket or seal is there to seal it on? I didnt seem to find one. So today ill start it up, let it warm up, let it sit for 5 min. check the dipstick add/subtract if needed.


There are 3 small O-rings and one the size of the cover. No gasket.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Goosedog

Posted May 13, 2005 - 04:39 AM


Mine used to groan too, started using Yamalube 4R and problem solved. :) Be sure to change you oil every third or forth ride too, as it's a small amount (1 1/2 qrts) and contaminates quickly.

Related Content

WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.