YZ400F acts like vaccum leak


No replies to this topic
  • FlashGordon

Posted April 23, 2005 - 06:08 PM

#1

Having a problem with my 99 YZ400. The carb is acting like there is a manifold leak. I somehow caused it when I tore the carb down for cleaning. I've gone back through the carb 3x. I did forget the washer on the pilot fuel screw that goes between the spring and the o-ring on the first rebuild. Wondering if the o-ring got damaged? When I raise the rpm off idle, it takes 4 seconds to drop back to idle. I checked the intake boot, and sprayed carb cleaner, looking for an rpm rise. No luck.

Any ideas?




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.