looking for 650r e-start


15 replies to this topic
  • 650 racer

Posted April 08, 2005 - 05:34 PM

#1

I am looking for an e-start kit for an xr650r!!!

  • rockmantex

Posted April 08, 2005 - 06:02 PM

#2

I added the Baja one to my BRP and it sure made life more pleasant. Expensive but well worth it. It works great and probably delayed knee replacement for a few years.

Steve :naughty:
03 XR650R (tagged w/magic button)
03 FJR
04 Wing

  • August

Posted April 08, 2005 - 06:32 PM

#3

I know I am new around, not new to the 650R but...I dont really see a need for an e-start...infact I am kinda against it! On both the 650R's I have had it was usually a 1-2 kick affair. I checked out the BD kit and teh weight and cost just doesnt seem worth it.
Then there is the thing about putting e-start on bikes that may encourage a lot of folks to ride them who shouldnt...kinda like allmost all cars are automatic...and gawd I wish most were manual...it would keep a lot of tards off the road I am sure.

Just wondering if I am in the minority...I love my kickstart NSR250, and love it on the XR...<shrug>

  • frankstr

Posted April 08, 2005 - 06:33 PM

#4

Where do you put the battery... ?

  • resslera

Posted April 08, 2005 - 06:35 PM

#5

I'm with you August. While it does take ONE good solid kick in general to start the 650r, it is a mans bike. Electric starts belong on the CRF450X! :naughty:

  • SMOKE

Posted April 08, 2005 - 08:18 PM

#6

IF they would make something that didnt look like something that came off my cummins motor then i might get one... tuck it in nice and neat price dosnt matter

  • Troy_Bell

Posted April 08, 2005 - 09:39 PM

#7

August is right, Kicking is no big deal on the BRP. If you wanted E-start, then you shoulda bought an L. I hate TARD's too!! :naughty: Get rid of auto-transmissions. :naughty:

  • xrjunkee

Posted April 08, 2005 - 11:56 PM

#8

I have seen the baja designs kitnice .here ia another option. There is a shop in san jose calif that sells a kit dont know if its any good but here is the website http://www.joeracerp....com/estart.htm
phone number and address
Joe Racer Products™
222 Barnard Drive, San Jose, CA 95125
Shop 408.924.0139
Fax 408.924.0468

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Old_Man_Time

Posted April 09, 2005 - 05:52 AM

#9

I have the Baja Designs kit on mine. I looked at the Joe Racer kit and read reviews of it from those who bought it. No one who reviewed it was happy. So I went with Baja Designs cause I have used their products and they stand behind what they sell. I love the Baja Designs starter. The battery sits right under the carb so all the weight is down low. It adds a bit less than 14 pounds to the bike.

I did not buy the kit because the bike was hard to start. It's easy to start specially with the edelbrock carb which also have. I bought it cause I was sick of getting myself stalled on the side of a hill where there was little room to move around and trying to balance a 300 pound bike on the edge of a narrow trail and kick it over was not any fun at all. That doesn't happen all that often but when it does the e-start is worth its weight in gold.

For those of you cave men who still want to retain square wheels go ahead I will always admire you but I'm just not a cave man. I don't mind what the future has brought to off road motorcycling. I think you should get rid of the Uni shock and go back to duals too.

  • 650 racer

Posted April 09, 2005 - 07:14 AM

#10

:naughty: August and Troy Bell, :naughty: The stock form of this motor is a breeze to kick, but put a 12.1 103mm piston in to and a stage 2 cam in it. Then mount the motor in a z400 frame, this causing you to not be able to get a full kick on the motor( at most 1/2 of the kick that you get when it on the BRP) . If you can start this motor by kicking it I will put I AM A TARD on the bike and rike it like that, but until then PISS OFF!!!!!!!!!!!! I hate it when people start to pass jugdement on pople before they no the whole story, most of us around here think very little of those weak minded people and try to over look them!

Everyone else thank you for your reply!

  • clodhopper

Posted April 09, 2005 - 08:17 AM

#11

I have no problem kicking mine over in most normal (flat ground), however, I've had a few times when kicking the beast over meant falling down a hill. Wound up rassling the heavy pig around until I had a less precarious vantage point. Would have paid a lot for the magic button right then.

  • resslera

Posted April 09, 2005 - 09:24 AM

#12

:naughty: August and Troy Bell, :naughty: The stock form of this motor is a breeze to kick, but put a 12.1 103mm piston in to and a stage 2 cam in it. Then mount the motor in a z400 frame, this causing you to not be able to get a full kick on the motor( at most 1/2 of the kick that you get when it on the BRP) . If you can start this motor by kicking it I will put I AM A TARD on the bike and rike it like that, but until then PISS OFF!!!!!!!!!!!! I hate it when people start to pass jugdement on pople before they no the whole story, most of us around here think very little of those weak minded people and try to over look them!

Everyone else thank you for your reply!


650 racer did you notice the smiley after my comment? I think it is you who needs to lighten up before telling me and others to PISS OFF! It was passed on as a good humor statement, not me bashing anyone.

  • Max Power

Posted April 09, 2005 - 11:48 AM

#13

I did not buy the kit because the bike was hard to start. It's easy to start specially with the edelbrock carb which also have. I bought it cause I was sick of getting myself stalled on the side of a hill where there was little room to move around and trying to balance a 300 pound bike on the edge of a narrow trail and kick it over was not any fun at all. That doesn't happen all that often but when it does the e-start is worth its weight in gold.



:naughty:

  • August

Posted April 09, 2005 - 12:07 PM

#14

:naughty: August and Troy Bell, :D The stock form of this motor is a breeze to kick, but put a 12.1 103mm piston in to and a stage 2 cam in it. Then mount the motor in a z400 frame, this causing you to not be able to get a full kick on the motor( at most 1/2 of the kick that you get when it on the BRP) . If you can start this motor by kicking it I will put I AM A TARD on the bike and rike it like that, but until then PISS OFF!!!!!!!!!!!!



Woah, take it easy, I was not knocking anyone for having an e-start, I would probably like it if I had it to...and it sounds like your bike/creation is a whole 'nother animal all together and all bets are off :D

I was just doing a general rant against e-buttons and auto trannies...just so you know I am not really so militant when it comes to the e-start as I am auto trannies...I am still amazed I had to order my 2003 Silverado with a 5 speed as there were noone available in 3 western states!! :naughty:

There is just something old skool about the kick, reminds of growing up in the late 70's early 80's when my grizzled old biker neighbor would kick start his Harley's...before it was cool to have a Harley....

So no hard feelings, to each thier own...but if Honda adds an e-start they better keep the kicker... :cry: Carry on... :D

  • jeff leonard

Posted April 13, 2005 - 08:59 PM

#15

I was of the same opinion that real men kick their bikes, but after a huge get off while pre-running for the 250, and kicking the bike for 20 minutes to start it while being totally drained is for the birds. Raced a Husky 510TE in the 250 w/elec. start, what a dream! Little down on power, but since all racers will crash, its nice just to push the button and go.

  • flack123

Posted May 29, 2005 - 06:16 PM

#16

How easy was this Estarter to install? (Baja Design one) I am looking into it and almost ready to purchase it. Is it also waterproof? I ride in lots of mud and sometimes have to splash through some large deep puddles. Will it handle alot of water??

Thanks in advanced





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.