Mounting Scotts Stabilizer and Computer


3 replies to this topic
  • SteveWR450F

Posted April 07, 2005 - 08:26 AM

#1

I have a 04 WR 450F. I am using an 03 YZ top triple clamp - that way I can remove my headlight (before I break it) and use a YZ number plate. I also have Scotts stabilizer and trail tech computer.

Does anyone have both the stabilizer and computer on their bikes? I am curious if there were any problems with room (such as against the number plate) by running both? Scotts recommends rotating the stabilizer 180 degrees but still not sure if that will give enough room.

Thanks for your input.

Steve

  • jerryls

Posted April 07, 2005 - 09:34 AM

#2

I have both mounted on my WR450, and there are no clearance issues with the headlight, not sure about a YZ number plate. Seach in the WR forum, I asked a similar question a couple months ago and a couple TT'ers were kind enough to post some photos of how they have theirs set up. Not sure if that will help, but should point you in the right direction.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Fulltilt3

Posted April 07, 2005 - 09:41 AM

#3

I have an 04 YZ450F that I have the scott's mounted 180 degrees as you mentioned. I have the ICO computer mounted as well. No problems at all.

I have the ProTaper top clamp.

  • motobark

Posted April 07, 2005 - 10:54 AM

#4

Here's my setup, 2500+ miles with no problems.

John

Scotts w/Trailtech

Another view

One more





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.