just tried out my dvp, and this is what happened

3 replies to this topic
  • fred

Posted October 26, 2000 - 01:51 PM


got home from work today put the needle, and tried it out.....

seems to rev quicker, pulls nice, but I had to turn my screw out 3.5 turns..
at 1.5 2.0 had a bad dead spot right off trottle....
2.5 to 3.5 seems to help but still has the dead spot... now this is with a quick twist of the gas...

45 pilot dvp needle 4# 168 main

any advice anyone...

  • James_Dean

Posted October 26, 2000 - 02:55 PM



Clark knows the DVP better-
Possibly #5 clip or #48 pilot or both... :)


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Tree_Crippler

Posted October 27, 2000 - 04:47 AM


I did this last week and there is a big differance between DVP#4 and #5. Put it on the #5, I could not get the front wheel off the ground in #4.

  • Clark_Mason

Posted October 29, 2000 - 03:54 PM


I had better luck with the 48PJ and the DVP in the number 5 from the top. Fuel screw out between 0.75 and 1.75 depending on altitude. 1.75 for sea level 0.75 at 4000 ft.


[This message has been edited by Clark Mason (edited 10-29-2000).]


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.