fat bars and bark busters.


3 replies to this topic
  • thumpasaurus

Posted March 07, 2005 - 07:01 AM

#1

Yesterday at the bike shop/junk yard I found a used set of adapter-risers in the junk box that fit in the stock clamp and allow you to use 'fat' bars. I'd been thinking about some higher bars anyway and they were cheap so I picked 'em up. Still don't have a bar for it.

The renthal, protaper, Tag 1 1/8" bars all slowly taper to 7/8" at the control ends. My current barkbuster clamps are 7/8 but where they'll fit on the fat bars, just outside the clamps, will be bigger. So who, if anyone makes clamps to get around this.

  • 1biglung

Posted March 07, 2005 - 07:12 AM

#2

TT Store or Rocky Mountain

They are pretty common and either place should have no trouble.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • thumpasaurus

Posted March 07, 2005 - 08:14 AM

#3

:)

D'oh!! Crap. They're in the thumpertalk store! I actually did look some before asking :)

thanks.

  • justicedone

Posted March 07, 2005 - 08:19 AM

#4

ha ha...glad you found them

I was gonna say look into Acerbis for help

rock on





Related Content

Forums
Photo

Which thumper motor for a street tracker? by woz


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • * * * * -
  • Hot  29 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.