Does anyone know if......


No replies to this topic
  • rockieman

Posted March 02, 2005 - 04:19 PM

#1

The needle bearings are the same in the relay arm (boomerang shaped linkage) and the connecting rod (U shaped link)? I lost a couple of these over the years in the midst of lubing my suspension. I could not detect any excessive wear as a result of running these bearings short one needle. I confirmed with my dealer that they do not sell the needles ala carte. In stead of replacing each bearing I was going to buy one to replace the three missing needles. Right now I have the swingarm all put back together and mounted on the bike....otherwise I would go check myself. Does anyone know off the top of their head?
My bike is a 99 WR400.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.