Help..... Bad Misfire


2 replies to this topic
  • Stonie426

Posted February 22, 2005 - 02:17 AM

#1

Anyone know what might be causing this....


'04 WR450 symptoms:

At between 20-25 mph, seems to be a complete misfire or very bad stutter resulting in a jolt every 20 yards or so.... at higher speed it's OK.


Jetting - OK with PJ/PS/PAJ: 48/1.5 turns/100, Needle/Clip: EMN/4, MJ/MAJ: 170/200, LJ: 40, Idle: 1800 rpm (approx).
CDi output voltages - OK
TPS - OK.
Coil secondary winding - OK, unable to check primary winding as meter is not accurate enough.
Plug - OK
In the middle of checking all other wiring, connections, grounds etc - haven't found anything obvious yet.

Any help out there....

Stonie.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • buck_y_lee

Posted February 22, 2005 - 03:21 AM

#2

I know you say you've checked, but sounds like plug or bad ground connection to me.

Similar to bad ground connection, any water in the plug well?

  • Seabass

Posted February 22, 2005 - 07:07 PM

#3

Same thing is happening to me, but mine started after I put on a new exhaust




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.