Short acc. pump problem solved

4 replies to this topic
  • DOC

Posted 26 January 2002 - 05:01 PM

#1


first up, it was pretty obvious from the start that you fellas don't like me here at all. i assumed that it was because i was from Australia, since i hadn't done a thing wrong. So i turned a bit nasty, and everyone ignored me. No worries. i'm sure everyone agrees.

Now i've been playing around with the short accellerator pump duration on my WR for a while, and have finally come up with a solution that gave me a total of 4 seconds duration. Naturally, the mod is dead easy, totally reversable, and takes 3 minutes to do (but you must do the BK mod if you already have not. this allows adjustmet).

My first attempt at creating a longer squirt worked, but took a long time to do, and was quite complex. It was still border line though, with problay not enough duration. This made me research it more, and thought it's best to have a long squirt adjusted down to the desired level.
The thing that pissed me off was the i spent a good deal of time writing the procedure and only received one comment. No one else gave a damn. NO ONE ELSE! I assumed again it was because i was a 'dumb' Australian (who knows the nation capital city of Australia? Who said Sydney?). But i like to share my good fortune with others, and if you are interested in doing this mod to your bike, let me know. Like i said, it is so easy, 'i should have thought of it sooner'.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • YZ400Court

Posted 26 January 2002 - 05:55 PM

#2

I thought the whole idea behind the BK mod was moving the start point of the spray so it doesn't hit the slide, and making it shorter duration. I thought it was less than a second if done right?
As for not caring for Aussies, well I've never met one I didn't like, now those New Zelanders are a different story :) (Just kidding).

  • yzf219

Posted 26 January 2002 - 06:43 PM

#3

I am interested in the procedure.... please post it. Thanks in advance.

Sean

  • Drinkn_Buddy

Posted 26 January 2002 - 08:20 PM

#4

I too am interested in the procedure. And as far as australians, you all sure know how to drink... :)

  • DOC

Posted 27 January 2002 - 12:53 AM

#5

[ January 29, 2002: Message edited by: DOC ]



If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!