Countershaft Sprocket Question


2 replies to this topic
  • allan68

Posted February 19, 2005 - 09:36 AM

#1

Is there a trick to lining up the sprocket AND the small outer plate which lines up the two bolts? :)
By pushing the plate all the way onto the shaft, the holes never seem to line up with the sprocket? :)
Nothing mentioned in my Clymer manual at all.
Thanks in advance, :p

Al

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bikemadtim

Posted February 19, 2005 - 11:11 AM

#2

If it's like the XR650R then you put it partway onto the shaft where it is grooved out and turn it slightly then the holes line up.

  • 1biglung

Posted February 19, 2005 - 11:38 AM

#3

That is correct. The sprocket goes all the way in and the keeper goes in the groove and rotates until it lines up opposite the sprocket splines to keep the sprocket from sliding off while allowing it to remain semi floating and not solid mounted.





Related Content

Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  159 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.