yz-400 /426 does it fit


2 replies to this topic
  • Shwantz34

Posted February 05, 2005 - 06:07 PM

#1

Hi Guy ! I'd like to know if you can do a YZ-426 with a Yz-400. I think the stroke is the same, only de bore is diferent ( 92mm 400 95mm 426) . So does somebody have already done that and whitch part do i need to do it. I also want to know if its possible to convert a 426 to a 450 . I know the base is not the same, but the bearing for the crank is the same. My idea is to use a 450 chrank with a cylinder of 450 and the 450 cam and cam chain. Do you know if it can be made ? :cry:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PumpkinHumper

Posted February 05, 2005 - 08:10 PM

#2

www.powroll.com they know all about doing this.

  • Shwantz34

Posted February 06, 2005 - 04:26 AM

#3

Thank you very much for the information !





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.