XR650L ; How do you adjust the valves....?


2 replies to this topic
  • bluerock5

Posted December 23, 2004 - 01:54 PM

#1

Is it hard to adjust the valves and how do you do it and what tools do you need? Thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mountainrider

Posted December 23, 2004 - 05:05 PM

#2

Is it hard to adjust the valves and how do you do it and what tools do you need? Thanks

Remove the fuel tank.I f you do not know how to remove the tank,do not try to adjust the valves. :cry: Remove the inspection plugs on the valve cover.Remove the plugs on the left side engine cover.Rotate engine counterclock wise until the T lines up with the notch.If you go a little past the T do not turn it back.Go all the way around and try again.Adjust valves to 004 intake and 005 exhaust.A socket set,wrenches and a screwdriver. :cry:

  • Haymaker

Posted December 23, 2004 - 05:21 PM

#3

You'll have to find the gap for the "L", but here's the basic procedure. http://www.xr650r.us/tech/ . Last link down.

E





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.