How long is the YZ throttle stop?

2 replies to this topic
  • Flip01

Posted December 22, 2004 - 01:34 PM


Just pulled the carb out to install the ZipTy fuel screw and check for the throttle stop mod. Looks like the dealer did install the YZ stop but I just wanted to make sure. The throttle stop screw measures 23.15mm. This sound right?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Jackazz

Posted December 22, 2004 - 01:41 PM


That depends on what you measured... the bolt "shank", or the whole bolt (head & all). The YZ one is 11mm shorter than the WR one. If I recall correctly, my WR's stock bolt "shank" was ~28mm long (not including the head), so ~17mm after cutting it down.

If you measured the length of the whole bolt, I'd say that your measurement sounds about right.

  • Flip01

Posted December 22, 2004 - 01:49 PM


DOH! Sorry, yeah the measurement I gave was for the whole screw all together.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.