Decomp. Plug


2 replies to this topic
  • nevadajay1

Posted December 21, 2004 - 04:36 PM

#1

O.K.
I got the T.T. Decomp. Plug, now how do I remove the OEM rubber piece?
There's not much room to work and I was hoping that someone had come up with a way to get at it without removing the radiator. Was there supposed to be instructions with this? :cry:

Thanks,
Jay
04 wr450f

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Rattler88

Posted December 21, 2004 - 04:56 PM

#2

I had the same problem, and I had to Lassen the radiator on that
side to get the old seal out, just drain the antifreeze down, so you can remove
the top clamp and the two bolts holding it to the frame, then you can get
enough room to get the seal out with a long thin screw driver ( carefully )
it does not take to long to do.
Also I used the old cable top clamp to help hold the plug in there with
only a little modification.

G Luck :cry:

  • nevadajay1

Posted December 22, 2004 - 07:19 AM

#3

Thanks for the advise, worked great! :cry:
Jay




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.