Decomp starting ritual?


3 replies to this topic
  • MrBlahh

Posted December 16, 2004 - 07:31 AM

#1

Before I Drop cash on a decomp cam

I dont mind the decomp lever

but I would love to be able to just kick

with the decomp cam, do you still have to be in the right spot to get it to fire? IE just past TDC?

I've got a 13:1 444 kit on my WR400, and if I dont have it exactly right, it will not start, the decomp lever helps finding that exact spot

if I still have to find the exact spot, I'm not going to spend cash on the decomp cam

  • BrandonW

Posted December 16, 2004 - 07:58 AM

#2

I have had the '03 exhaust cam in two bikes (400 and a 426) and I can kick like a two-stroke, and the bike fires. Not *every* time, but the second kick is plenty easy.

You can forget "The Drill" if you have that cam.

:cry:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sigepmock

Posted December 16, 2004 - 08:41 AM

#3

I have the YZ Hot Cams with the decomp in my 02 WR426. I just kick away and it fires right up. I did leave the decomp lever on it, if I stall it I pull the lever give a couple of kicks to clear the cylinder. It always starts first or second kick. Not sure how the big bore kit is gonna affect it, but I have to think it won't be that bad.

  • MrBlahh

Posted December 16, 2004 - 12:14 PM

#4

The races here are dead start, bike turned off

if it starts on 2nd kick your in last place!

however it would be nice to just kick in case of a stall




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.