will 00 426 springs (both fork and shock) fit 03 450?

2 replies to this topic
  • krotchwaffle

Posted November 23, 2004 - 02:56 PM


i know i can probably make the rear fit and have success with adjusting it between the sag and the clickers, but i'm not sure if the forks are similar enough between the two to make it work. i know the outer tube is the same diameter, but i'm unsure of the internals. if worse comes to worse, it's simple enough to pull the fork springs that are in the 450 out and compare them.

any help is appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Matt96xr6

Posted November 23, 2004 - 04:04 PM


yes they should all work. The only difference may be the length.

  • Vetmxrider

Posted November 23, 2004 - 10:09 PM


The fork springs are the same size, 41.2 mm X 462 mm and should fit just fine.
Ed. :cry:

Related Content


100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.