WR pipe on a YZF

No replies to this topic
  • gmiles

Posted November 21, 2004 - 02:21 PM


I am currently running a ProCircuit header and silencer on my yz426. However, in the UK more and more tracks are doing noise testing and some only let on thumpers if they have an enduro or Q pipe. With this in mind I have just bought a full WR426 system from ebay.
I might stick on the stock header and run the Arrow silencer and then if needed put on the wr silencer.
Does anybody else run a YZF with a WR silencer. I realise it may take some power away. This isn't going to be a problem as the bike has more than I can handle. My main worry is how it is going to run. Any thoughts or experiences.

Related Content


BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.