Talon sprocket bolts - no washers

No replies to this topic
  • slappie

Posted November 12, 2004 - 07:35 AM


I just put on my Ironman sprockets and used new Talon bolts and Red Loctite.

I was wondering, since the stockers use a washer on the nut side and the Talon's don't, is that a problem? I used the Talons as they came, with no washer on the nut side.

Was wondering if anyone re-used the stock washers with the Talons. It almost looks like the bolts aren't long enough to use a washer anyway - the nylock portion of the nut wouldn't get a good bite.

Just some things running thru my head I thought maybe ya'll could help me with.

Related Content


Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.