A slight bog when the throttle is slammed open

1 reply to this topic
  • Kermit

Posted December 13, 2000 - 12:37 PM


Any suggestions? I can't find it in the archive. (this is for my WR)

[This message has been edited by Kermit (edited 12-13-2000).]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • James_Dean

Posted December 13, 2000 - 09:49 PM


Expect to richen the jetting a little.

It would help to know what your current jetting is.

Make sure your idle is not set too low. Start with the pilot screw, backing it out 1/4 turn at a time to look for improvement. You might need a bigger pilot jet or have to move the needle 1 clip position richer to eliminate the hesitation.



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.