Baja Kit gremlins, what should the regulator output voltage be?

3 replies to this topic
  • petrolhead

Posted October 23, 2004 - 10:11 PM


My guess is the BD regulator should put out about 14v, right?

Mine is coughing out less than 4 volts and I can't find any loose, damaged, open, shorted or misconnected wiring.

Anyone else seen that happen?

Generator is putting out 14.5v, so all is well at that end of things.

Thankd for any input. Bike runs fine, just with no lights. :cry:

  • Old_Man_Time

Posted October 24, 2004 - 04:53 AM


Call Tech Support at BD, they will help you get things right.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • don87xr600

Posted October 24, 2004 - 09:27 AM


How old is your kit? Talk to Dan at BD, they have a new voltage regulator thats replacing the crappy old one.

  • petrolhead

Posted October 25, 2004 - 09:50 AM


Rectifier is putting out 5v at idle and 3v at revs.
That ain't right!!!

Spoke with Dan, new rectifier on the way, should be back on the road by the weekend. Yaay!!

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.