Suspension Work


1 reply to this topic
  • BRP27

Posted October 18, 2004 - 04:36 PM

#1

What does it cost to have the front fork tubes and shock shim stack redone by a company. I am looking for a plusher ride over plowed fields or whoops( 2.5 wt oil ?) and am willing to sacrifice jumping and dropping off of 4ft ledges. Who does this well?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • qadsan

Posted October 18, 2004 - 04:50 PM

#2

There's lots of good companies to choose from. First make sure you have the right springs installed in your forks & shock. The correct springs along with fresh fluids can go a long ways towards a very noticible improvement. If you're still looking for more improvements, then consider a revalve. My revalves were about $150 per end from Barnums and I've been very happy with his work. He's done various bikes for my friends (YZF, CRF, DRZ, KLX, XR, etc) and several for us over the years, all with excellent results.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.