Suspension Shims


4 replies to this topic
  • J_T

Posted October 15, 2004 - 07:03 PM

#1

Can I buy Shims individually? I looked at racetech's web site and they sell them in packs of 10 for 15.90 and of the ones I need most are just one of each size so I don't need 10 of each one. I didn't seem them listed online at Denniskirk or Rockymountain?

Any ideas?

Thanks

JT

  • drex

Posted October 15, 2004 - 08:30 PM

#2

Hey, last month I was in the same boat. Ended up buying the 10 (?) pack from Race - Tech.

What size do you need? :thinking:If you're doing 650R forks I might have what you need.

:cry:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • J_T

Posted October 16, 2004 - 03:48 AM

#3

That would be great! I am doing a 2000 XR650R Forks and shock. I'll obviously pay you and s/h for any you would want to spare...

Below is what I am thinking I'll need...its the shock shims (12 inside Diameter) and the fork shims below that...(I believe 8ID)

Here are the ones I'm anticipating needing.
# needed -- THickness x diameter x Inside Diameter
1 -- .30mm X 34mm x 12ID
1 -- .25mm X 38mm x 12ID
1 -- .25mm X 34mm x 12ID
1 -- .25mm X 32mm x 12ID
1 -- .25mm X 30mm x 12ID
1 -- .25mm X 26mm x 12ID
1 -- .25mm X 24mm x 12ID
1 -- .25mm X 23mm x 12ID
1 -- .20mm X 38mm x 12ID
1 -- .10mm X 28mm x 12ID
2 -- .15mm X 22mm x 8ID
4 -- .15mm X 21mm x 8ID

Anyone else that can spare any I'll pay you for them...if anyone still knows of a place to buy them not in large quantities thatd also be helpful!

Thanks
JT

  • BWB63

Posted October 16, 2004 - 04:03 AM

#4

whoa, I think you will only need (2) 1 -- .25mm X 38mm x 12ID and (1) -- .25mm X 34mm x 12ID (2) -- .15mm X 22mm x 8ID or (4) -- .15mm X 21mm x 8ID the rest are all there in the shock already or the forks. :cry:

  • J_T

Posted October 16, 2004 - 04:37 PM

#5

OK! I have it all figured out now! Either where can I get them individually or anyone want to sell some!

My previous post of what I needed was incorrect after some more decifering here is what I have come up with!

What I need; (updated 10/16 10:25pm ET)
1 -- .30mm X 34mm x 12ID
2 -- .25mm X 38mm x 12ID
2 -- .15mm X 22mm x 8ID
4 -- .15mm X 21mm x 8ID

I believe they are 10 for 15.90 so I'll pay $2.00 each and s/h since you had to pay for so many!

Just let me know!

Thanks

JT





Related Content

Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  158 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.