86 XR600R popping and spitting when secondary carb opens

1 reply to this topic
  • duke1110

Posted September 27, 2004 - 05:59 AM


Hi all. Went riding this weekend and my XR600 would pop and sputter anytime the secondary carb would open. It didn't matter if it was under load or not, but it would kinda clear up near the higher rpms. It starts and idles just great but anytime you get on it, it just starts spitting and popping. it is all stock with a 1.0mm over piston. any ideas? any insight will be greatly appreciated.
This is a great forum and know someone will helpout.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Roll_it_on

Posted September 27, 2004 - 06:22 AM


If it just started doing this and all others things have been unchanged then it is time to open up the carbs and clean them out. Sounds like you have something plugging up one of the jets in the second carb. While you are taking them off look over the intake boots to make sure they are in good shape and don't have any air leaks.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.