carb pilot

1 reply to this topic
  • bork

Posted March 02, 2002 - 10:48 PM


When purchased bike used, carb was all outta wack ! So I rebuilt, much better but the pilot screw has most rpm at all the way in. should be 1.5 - 2 turns out. Needle looks ok. Anyone else ever have this problem?
Also I weigh about 300 lbs , is there a weak spot to look for on frame to frquently inspect?
THANKS bruce

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • terryhotshoe

Posted March 02, 2002 - 11:24 AM


carb pilot yes check and see what the pilot jet is!!you more than likely need to change it!As far as checking frame check foot peg bolts keep them tight!!Also check where they mount to the frame cracks have been known to form around the footpeg mounts!!terry

Related Content


Post Apocalypse, ThumperTalk style! by Justin Pearson

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  186 replies

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker

Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 9 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.