what size edelbrock on your xr?



3 replies to this topic
  • reknelb

Posted February 23, 2002 - 07:53 AM

#1

what size edelbrock carb do you run on your xr 600? What size on your 650? If you have a built 600 motor (cam , piston, etc.) do you go up in size on the carb, or just change needle? Thanks

  • qadsan

Posted February 23, 2002 - 08:37 AM

#2

The Edelbrock carb kits for specific bikes are listed at this link.
http://www.edelbrock.../qsoffroad.html

Depending on how much the motor is built, you may or may not need another carb, but in most cases I've heard about so far, the stock Edelbrock carb is pretty flexible for many applications. The intended XR650R Edelbrock pumper carb works well for the XR650R with the HRC kit that includes the bigger cam, piston, etc, with only a needle change from the stock 17e to the included 19e. I've talked to several people who've done this and they were happy with the results. Actually, one was not happy at first because he changed his needle to the 15e (leaner needle) by mistake, got frustrated and couldn't see the forest from the trees afterward, but once he got the richer 19e needle installed he was very happy. I've also talked to XR400 owners who have used the intended carb after they installed their 440 kits and they too were happy. Same goes for the XR250 with the 280 kit.

If you have a special application that you're worried about, also give a call to Edelbrock and see what they have to say. Mike Price at Edelbrock can also help you for special applications and has some good knowledge offer.

Hopefully there will be some others here who can share their experiences.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • reknelb

Posted February 24, 2002 - 12:17 PM

#3

edelbrock just lists part #, not size (40mm, 41mm?)

  • MaXRSmart

Posted February 25, 2002 - 07:25 AM

#4

If your 600 is built up, ask for the 628 carb. I put the 600 carb on my bike (stock piston, ported with 628 cam) and could not quite get it dialed in. After culsulting Edelbrock, the recommended the 628 carb for my application. They told me the 600 carb is for stock 600's with maybe a pipe and snorkle removed. If you have any engine work or are planning it, go for the 628 carb Part #3114. The bike ripppppps now and I am very happy with the QwikSilver Carb.

MaXRSmart :)





Related Content

Forums
Photo

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  158 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.