Hi , Bought this E headpipe in Ebay , but once got it i saw there is a place for a nut near the end of the headpipe that connect to the slip on.
does this means is a S (is this for the heatshield ???) Pipe ???
E headpipe question + Picture
Started by alophind, Sep 24 2004 12:34 AM
6 replies to this topic
Posted 24 September 2004 - 12:34 AM
Hi , Bought this E headpipe in Ebay , but once got it i saw there is a place for a nut near the end of the headpipe that connect to the slip on.
does this means is a S (is this for the heatshield ???) Pipe ???
Posted 24 September 2004 - 03:20 AM
Its for the heat shield
My E has one
The Difference is in the diameter of the pipe
The E is Fatter
My E has one
The Difference is in the diameter of the pipe
The E is Fatter
Posted 24 September 2004 - 04:34 AM
It will fit on an S, Just make a different sealing sleeve and you are good to go! I fit mine to a Yosh slip on.
Posted 24 September 2004 - 07:52 AM
sealing sleeve ???
I went to a store today and the tried to fit a local slip on onto the E headpipe , it looked like they have the exact same diameter , could it be it more logical that he brought me slip on of diff. bike ? not drz?
I went to a store today and the tried to fit a local slip on onto the E headpipe , it looked like they have the exact same diameter , could it be it more logical that he brought me slip on of diff. bike ? not drz?
Posted 24 September 2004 - 09:09 AM
Stu,
Is the E headpipe larger than the S? I've got a yosh slipon too and want to try to get a bigger headpipe.
Thanks,
Paul
Is the E headpipe larger than the S? I've got a yosh slipon too and want to try to get a bigger headpipe.
Thanks,
Paul
Posted 24 September 2004 - 10:13 AM
Paul,
The E head pipe is larger than the S. If you remove the graphite/wire mesh sealing sleeve from the Yosh tail pipe you will find that it slips over the E head pipe nicely - only now there is too much room (approx 2mm diam.). I made my own sealing sleeve out of aluminum sheet metal. It was about 0.5mm thick so a few wraps and it was right. I was concerned that the aluminum would not take the heat so I made one out of stainless as well (really a son-of-a-gun to bend neatly). But the aluminum is holding up just fine and not going away. There are now about 500 miles with this sleeve on.
I added the E headpipe because I bought a slip on (bad move) and now am adding a hot cam intake and an e ex cam and want the increased breathing that the e headpipe will allow. Go for it - it works fine.
Oh ya, you need to grind off about 1/2" from the e head pipe so it fits all the way into the Slip on. No big deal, just grind until it reaches the collar and then clean it up with a file.
The E head pipe is larger than the S. If you remove the graphite/wire mesh sealing sleeve from the Yosh tail pipe you will find that it slips over the E head pipe nicely - only now there is too much room (approx 2mm diam.). I made my own sealing sleeve out of aluminum sheet metal. It was about 0.5mm thick so a few wraps and it was right. I was concerned that the aluminum would not take the heat so I made one out of stainless as well (really a son-of-a-gun to bend neatly). But the aluminum is holding up just fine and not going away. There are now about 500 miles with this sleeve on.
I added the E headpipe because I bought a slip on (bad move) and now am adding a hot cam intake and an e ex cam and want the increased breathing that the e headpipe will allow. Go for it - it works fine.
Oh ya, you need to grind off about 1/2" from the e head pipe so it fits all the way into the Slip on. No big deal, just grind until it reaches the collar and then clean it up with a file.
