Edelbrock pumper kit for XR 600 ?

1 reply to this topic
  • Brian_Heath

Posted February 18, 2002 - 01:52 PM


Has anyone put an edelbrock pumper carb on their XR 600? Are they as good as mukini or keihin pumpers?

[ February 18, 2002: Message edited by: Brian Heath ]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MaXRSmart

Posted February 19, 2002 - 12:24 PM


I have the QwikSilver pumper carb on my '95 XR600. It is one of the better modifications I made to the bike. The bike starts first or second kick now and responds like a two-stroke. If you have a stock 600 or with a pipe, get the XR600 carburetor. If you are planning any engine modifications, (ported, big bore piston, etc) order the XR628 carburetor. I started with the 600 carb and could not get it dialed in just right. When I talked to the Tech guys at Edelbrock they told me with the ported head I should use the 628 carb. Now the bike rips and I could not be happier.

I can't tell you about the Mukini or Keihin pumper carbs because I did not try them. I chose the QwikSilver because of the ease of adjustment with no jetting. Good Luck

MaXRSmart :)

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.