Looking for best SS brake line routing


3 replies to this topic
  • jasv11

Posted August 31, 2004 - 03:38 PM

#1

Does anyone have a pic of their bike (wr426) with a Stainless front brake line installed. I'm trying to figure out the best way to run it

  • yamaha.dude

Posted August 31, 2004 - 04:30 PM

#2

I'll have a look, or take one... but it is simple enough... just get the fork protector with the CR style clamp, or get or make a clamp to hold the line on the fork guard, then, just run the brakeline through the clamp, on the inside of the fork leg (not actually touching the fork leg), and down to the caliper... Just like a Honda... although, the Honda-owned patent ran out recently, so the Yamaha 05's are coming out with the brake line done right, from the factory...

Also, if you do the brakeline conversion, it is quite safe to remove the fork guard guides and avoid possible snagging of the brake line or the new clamp...

Good luck,

David

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jasv11

Posted August 31, 2004 - 04:43 PM

#3

Great!! thanks man. :thumbsup: If you could take a pic I would appreciate it alot. You can email it to me if you want or post it here.

jasv11@excite.com :devil:

  • Indy_WR450

Posted August 31, 2004 - 05:34 PM

#4

there are pics on ride engineering web site. I am happy with there set up.
http://www.ride-engi...php?p=b&s=0&e=5
Go to page 3




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.