wr plastics


12 replies to this topic
  • dirtryder52

Posted August 25, 2004 - 10:22 AM

#1

will yzf graphics fit on a wr?

  • ddialogue

Posted August 25, 2004 - 10:40 AM

#2

I'm not sure about the tank but the shrouds have slightly different bolt hole locations. You'd have to really trim them up to make them work.

  • jchantzWR400F

Posted August 25, 2004 - 01:03 PM

#3

What years are we talking about?

  • jchantzWR400F

Posted August 25, 2004 - 01:04 PM

#4

What years are we talking about? 98-02 will be relatively interchangable. After that, I'm not sure.

  • WR_Dave

Posted August 25, 2004 - 03:39 PM

#5

http://img.photobuck...ve/Apr05028.jpg I recently put YZF grahics on a WR , both '02's and you will need to do some creative surgery to make them look "good from far" if you know what I mean. WR Dave. :thumbsup:

  • dirtryder52

Posted August 25, 2004 - 05:19 PM

#6

cool thanks
:thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • dirtryder52

Posted August 25, 2004 - 05:19 PM

#7

cool thanks

  • jchantzWR400F

Posted August 26, 2004 - 06:32 AM

#8

http://img.photobuck...ve/Apr05028.jpg I recently put YZF grahics on a WR , both '02's and you will need to do some creative surgery to make them look "good from far" if you know what I mean. WR Dave. :thumbsup:


Funny thing is, I put those same graphics on mine and had to trim very little. Only around the mounting holes for the radiator shrouds. It looks perfect. I have a Clark tank though and the tank graphics were a little undersized. It still looks good IMO.

  • SteadyEddy

Posted August 26, 2004 - 01:36 PM

#9

hey dave, nice pic
How do you find those boots on the shocks? good idear for protecting them :thumbsup:

  • jjk

Posted August 26, 2004 - 05:29 PM

#10

I have the ims tank on my bike.. i believe the shrouds are yz shrouds but i could be wrong..any idea what year range of graphics will work for this?

  • 5valve

Posted August 27, 2004 - 07:26 AM

#11

hello

even better is to use neoprene, material for diver suits
go to the store making stuff from neoprene and give them the measurments (length, width)
its quite stretchy material and above all, cheaper than original "made for bike" neoprene
Posted Image
keeps away water, mud, dust while you still keep the original plastic protection for hard particles

  • jchantzWR400F

Posted August 27, 2004 - 07:13 PM

#12

I have the ims tank on my bike.. i believe the shrouds are yz shrouds but i could be wrong..any idea what year range of graphics will work for this?


You should look at anything from 98-02. O3 and 04 stuff will not work.

  • SteadyEddy

Posted August 27, 2004 - 10:30 PM

#13

Thanks 5vlave
:thumbsup:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.