Yoshi Tec Inserts


3 replies to this topic
  • allan68

Posted August 22, 2004 - 07:46 PM

#1

Has anyone used the Tec Inserts for a Yoshi pipe?
I just purchased the quiet one to quiet down the Yoshi (104 db ouch!!) and it does not seem to fit.
There is no way the end cap can go on with the insert installed.
any info would be appreciated.

Al

  • Bpawb

Posted August 23, 2004 - 03:07 PM

#2

hiya Allan,.. If you haven't already figured it out, here's what you do...... take the exposed tip of the insert, and grind off about 1/4 of the lower edge at a 45 degree angle...... then the end cap should fit in place... it worked for me, hope this helps

Paul

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Bpawb

Posted August 23, 2004 - 03:07 PM

#3

hiya Allan,.. If you haven't already figured it out, here's what you do...... take the exposed tip of the insert, and grind off about 1/4 of the lower edge at a 45 degree angle...... then the end cap should fit in place... it worked for me, hope this helps

Paul

  • allan68

Posted August 23, 2004 - 07:54 PM

#4

Paul, Thanks for the reply.
I called Yoshi, and I have a first generation pipe, which has no inserts or spark arrestors available.
The one I purchased was for a newer pipe.





Related Content

Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  186 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.