Need some torguee specs Applied Triples


8 replies to this topic
  • John_Lorenz

Posted August 21, 2004 - 01:10 PM

#1

Anyone have the torque foot pounds for the Applied Triples. Need the Bar Mounts specs thats it. 19mm Bolt that clamps down the mounts on the top triple yz426

Thanks in advance

Can not find my dang paperwork and the site has no tech info :thumbsup:

  • Hamish

Posted August 21, 2004 - 02:45 PM

#2

just do 'em up tight!
The head is the only place I use a torque wrench on my bike

  • John_Lorenz

Posted August 21, 2004 - 04:32 PM

#3

Got what I needed

  • YAMAKAZE

Posted August 22, 2004 - 02:54 PM

#4

Hey John...

You have my cell number.... Call me somtime tomorrow....

Bonzai :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ncmountainman

Posted August 22, 2004 - 03:05 PM

#5

just do 'em up tight!
The head is the only place I use a torque wrench on my bike


i've read somewhere that over torque can cause the tube to bind as it goes up and down.

  • rsstom

Posted August 22, 2004 - 03:22 PM

#6

mountainman is right. 16-18 ft-lb is plenty for the clamps. You can bind the sliders if the clamp bolts are overtorqued.
In addition to the head, the cam caps are another good place to use a torque wrench.
But I must admit that's about all I use the torque wrench on!

  • Hamish

Posted August 23, 2004 - 03:51 AM

#7

i've read somewhere that over torque can cause the tube to bind as it goes up and down


Yeah, I'll buy that, not that I've ever torqued mine.
But the question was regarding the bolts that hold the bar clamps onto the top tripple trees (i think)

  • John_Lorenz

Posted August 23, 2004 - 05:13 AM

#8

Guys
Thanks what I was looking for was the torque specs for the Bar Mounts. These are 19mm bolts that attache the Pro-Taper Bar mounts on to the top of the triple. Not the 10mm bolts that hold the tubes.

:thumbsup:

Yamakaze :devil: will do

  • Treebark

Posted August 23, 2004 - 09:52 AM

#9

When mine come in I'll let you know. Should be in later this week or early next week.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.