04 450F sparkplug removal/ seat brackets locknuts


2 replies to this topic
  • Toobold30

Posted August 16, 2004 - 11:50 AM

#1

When removing a plug in the 450F do you have to remove the gas tank to remove the plug...Also has anyone had the seat bracket nuts that the bolts bolt into come off of the seat/fender brackets...Also do you think JB weld would hold them back in place...thanks guys

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cortez450

Posted August 16, 2004 - 12:12 PM

#2

Yep, you must pull the seat, tank and shrouds to pull a spark plug. You can leave the shroud attached to the tank. Just pull the bolts that hold the shroud to the radiator. It is about a twenty minute project, but the more times you do it, the better you will get! Why your in there clean your air filter as well.....good ridin' :thumbsup:

  • Fastest1

Posted August 16, 2004 - 07:15 PM

#3

Are you talking about the nuts on the inside of the subframe? Have them welded! Not JB weld. Yeah it will probably work but tack welding it should only cost a couple of dollars.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.