Helmet Visor Fix?



3 replies to this topic
  • RacerX

Posted June 21, 2001 - 05:32 AM

#1

Have an HJC helmet that has one of the visor screws pulled out. I can kinda screw the screw in but the insert is basically stripped. Anyone have ideas on an easy fix for this problem?

  • *mike68*

Posted June 21, 2001 - 06:08 AM

#2

A resin based epoxy may work

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RacerX

Posted June 22, 2001 - 12:53 PM

#3

The problem is with the threaded insert, it's stripped. I probably need a new insert but don't know where to get one. I'll use epoxy to install it though if/when I do find one. Any other ideas out there...

  • mcarp

Posted June 22, 2001 - 02:03 PM

#4

If it's metal, JB Weld should do the trick...




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.