engine problem with 2000 426


2 replies to this topic
  • s3706

Posted July 28, 2004 - 09:06 AM

#1

The bike started acting funny and kept stalling on me. I stopped riding for a couple of minutes to let the bike cool off. I tried to start the bike after a couple of minutes and I could not move the kick start with the decompression lever pulled in. After a couple of minutes of messing with it I was able to kick it over and start the bike but it would only idle for a couple of seconds and then die. After that couple of seconds of idling it did the same thing with the kick start and decompression lever. I seems like it is hanging on something but not sure what it is. When I got it back home I took the valve cover off and checked the timing chain and cams and decompression lever and they all look ok. I also checked the timing and it looks correct.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Hotdog

Posted July 29, 2004 - 03:41 AM

#2

Plenty of oil and water? Sounds like it was siezeing up? Was it over heating? Did you have a burnt / funny smell when you pulled the top off?

  • KevB

Posted July 29, 2004 - 04:56 AM

#3

My WR400F started behaving in a similar fashion when I had been doing a very wet and muddy day of riding. Turned out to be that the Accelerator Pump had a load of water on top of the diaphram. Cleaning the carb, blowing out all jets etc with an airline made it run like new again...




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.