Stock pipe



3 replies to this topic
  • dhowell

Posted June 08, 2001 - 08:28 AM

#1

Does anyone know the decibel level for a stock WR426?

  • wrpunisher

Posted June 08, 2001 - 11:44 AM

#2

With the cork in I think it's around 85-88 Db. Uncorked it's around 100-101.

------------------
Chris
99WR400F

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Carl_Youngstrom

Posted June 08, 2001 - 06:26 PM

#3

I tested mine with a meter. Using the SAE procedure (20" from outlet at a 45 degree angle, half the rated RPM)the stock pipe was 96db. With the insert removed it was 109db, which is WAY TOO LOUD for trail riding if we want to continue.
At idle the stock was 81db, insert out was 100db.
Carl

  • dhowell

Posted June 11, 2001 - 03:48 AM

#4

Thanks, this helps out a lot.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.