04 Starter upgrade side cover bushing

4 replies to this topic
  • ETP

Posted July 20, 2004 - 04:21 AM


Getting ready to do the mod. The bushing will save the purchase of a new 04 cover, so I understand.
Forum searches on the subject shows that Yamaharichey was going to make some. Thats all I could find. Does anyone know if they can be purchased? Part number, etc.? Mine is a Canadian model. I assume there is no difference in the parts from the US model.
Also, I was thinking about first pulling the side cover off to see if it is cracked before purchasing the bushing. If it is cracked, I have to get the cover anyways. Maybe I should buy all the parts first before tearing into it. Any thoughts on this. Thanks in advance for any input. :thumbsup:

  • beezer

Posted July 20, 2004 - 04:42 AM


I made a couple of them.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted July 20, 2004 - 05:01 AM


You can get the bushing at your friendly Yamaha dealer.

P/N 90380-10002-00 Bushing, Solid

Some dealers have a hard time finding it listed but it is available. Should be under a buck!

  • ETP

Posted July 21, 2004 - 03:26 AM


Thanks guys...

  • beezer

Posted July 21, 2004 - 03:36 AM


If you want one PM me your address.

They will just sit on my shelf for 10 years until I throw them out.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.