Where to get a replacement header?


9 replies to this topic
  • gawarrior

Posted July 09, 2004 - 04:29 PM

#1

I need to get a replacement header for my 02 WR426F. I bent mine up a bit. It will do for now but I would like to get another one if possible if not too expensive. I am open for YZ or WR.

Could I use a YZ header on a WR muffler though? I would like a full YZ exhaust if I could find one at a good price.

anyway, Thanks ahead of time.

  • Jerry_250f

Posted July 09, 2004 - 05:11 PM

#2

try ebay tons of people are selling stock exhaust systems :thumbsup:

  • Hamish

Posted July 09, 2004 - 11:32 PM

#3

I just put a stepped GYT-R header pipe with a stock YZ muffler on my 426. Has good all-round performace, especially in the midrange. The top end is crap compared to the DSP system I removed, but it's much quieter and has smoother power.

  • gawarrior

Posted July 10, 2004 - 04:09 PM

#4

I just put a stepped GYT-R header pipe with a stock YZ muffler on my 426. Has good all-round performace, especially in the midrange. The top end is crap compared to the DSP system I removed, but it's much quieter and has smoother power.



How much was it?

  • gawarrior

Posted July 10, 2004 - 04:11 PM

#5

try ebay tons of people are selling stock exhaust systems :devil:


Hey if you don't mind could you give me a link. I did a search for YZF 426 exhaust and nothing came up. :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Bryan47

Posted July 10, 2004 - 06:56 PM

#6

Try searching with different title spelling. I just picked up a White Bros Exhaust for half of what it would've cost me from a local dealer....and it was a new item on e-bay! :thumbsup: Keep searching, there was a lot on there last time I checked.

  • mtrablue

Posted July 11, 2004 - 05:34 AM

#7

I just put a stepped GYT-R header pipe with a stock YZ muffler on my 426. Has good all-round performace, especially in the midrange. The top end is crap compared to the DSP system I removed, but it's much quieter and has smoother power.



How much was it?


gytr comes from your yamaha dealer. the stainless steel header lists for about $120. it appears to be the same product as the white bros. header.

  • gawarrior

Posted July 11, 2004 - 08:23 AM

#8

Cool. That isn't too bad. Maybe I will pick up one of those.

Bryan47, if you don't mind what did you type in to do a search?

  • wardirt1

Posted July 13, 2004 - 04:54 AM

#9

I bent mine two weeks ago in front of the heat shield, sent it to piperepair.com and had it back in 1 1/2 weeks good as new. I recommend checking out their web site. They did an excellent job. If I remember right, they fix any pipe for $50 + shipping. You can't even tell it was ever bent unless you look very very close.

  • darmino

Posted July 14, 2004 - 05:31 PM

#10

I have one for an 02 in good condition (no dents), if your interested PM an offer and I will email you some pictures




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.